Random good picture Not show

1, This method reduced machining time greatly and increased cutting efficiency availably. It also had the characteristic of intelligent control.

2, Improving the service life and cutting efficiency of the segment of cutting border are the key problem of studying the metal bond diamond saw blades.

3, Due to mechanical cutting efficiency is high, the cutting workers to consider and calculation of optimization, which can lead to mechanical cutting line of steel waste is serious.

4, Management bottleneck: due to mechanical cutting efficiency is very high, cutting workers to consider manual calculation and optimization set of row, with only parts cut production order.

5, Pointing to the problems on the cutting efficiency in MC in our country, the methods to improve the cutting efficiency are discussed and summarized.

6, In the traditional titanium alloy process the cutting efficiency is lower, this is because both cutting speed and tool life are lower and machine power is not enough.

7, The test proves that vibration cutting efficiency is high and cutting resistance force is small when the vibration frequency is nearly equal to the natural frequency of cutting material.

8, When cutting, drilling and fragmenting rock, failure mechanism around cylindrical load is an important research subject to improve cutting efficiency.

9, This method can be used not only to enlarge the machine's cutting range but also to improve the machine strength and cutting efficiency by adjusting parameter of the machine.

10, According to coal breakout feature, the author has studied the relationship between cutting groove shape and the lump of coal and cutting resistance as well as cutting efficiency.

11, Gven concusions have important significance for planning optimal cutting path of cutting heads and raising cutting efficiency as well as advancing speed.

12, While compound cycle instructions are applied, to use different instructions bring different cutting efficiency.

13, The application of the optimized result in the processing simulation enhanced not only the cutting time, but also the cutting efficiency.

14, A high-speed sawing machine for aluminum bar is designed, the application of woodworker-circular-saw blade improves the cutting efficiency and quality, and reduces the waste of material.

15, The car cut convenient use, low cost, reduce the handiwork cut labor strength and improving cutting efficiency and quality.

16, The experiments results prove that under the same operating condition,[http://sentencedict.com/cutting efficiency.html] by adopting ultra-high pressure can achieve 2-3.6 times higher cutting efficiency than employing ordinary bit.

17, Experimental study on the effects of operating parameters and fluid performance on casing cutting efficiency is introduced in this paper.

18, The hydraulics and abrasive parameters of premixing jet has great effect on casing cutting efficiency.

19, The fracture toughness of silicon being bigger than ceramic, the cutting efficiency is higher because of the easier brittle chip formation mechanism.

20, The two kinds of honing tools in the article have the good rigidity, high cutting efficiency, at the same time, they are easy to operate and have the good practical value.